Aqua Lung - Professional Diving Equipment

BC Styles

English

Threading the Cylinder Band

Your BC ships from the factory with the cylinder band already threaded but in the event it becomes unthreaded, please follow the directions below.

1. Firmly grasp the metal D-ring with your left hand.

2. While firmly holding the metal D-ring, rotate the buckle back towards the webbing. The buckle should form an angle with the metal D-ring as shown in the top view.

3. Insert band through the metal D-ring, then through the middle slot.

4. Insert band through the inside slot.

5. Insert band through the outer slot.

NOTE: This final threading step is done when the BC is secured to the cylinder (refer to step 4 in section: Securing the BC to the Cylinder). Close the buckle halfway to prevent the webbing from slipping and thread the free end of the band through the open slot in the end of the buckle.